| SuperSoft For Inkjet Transfers onto White and Light Fabrics |
||
| For best transfer results use a commercial heat press. | ||
| 1. | Printing Your Transfer | |
| (a) | Design or select your image in your art software | |
| (b) | Mirror your image in your graphics software or select the Flip, Horizontal, T-shirt, or Reversed mode in your printer settings | |
| (c) | Print your image on the coated side of the SuperSoft Dark transfer paper. | |
| (d) | Make sure the printed image is dry before transferring. Depending upon your printer settings, the transfer will typically be ready for application immediately. | |
| (e) | DO NOT over saturate colors. It will not enhance the transfer quality. A little color will go a long way! | |
| 2. | Commercial Heat Press Application | |
| (a) | Set heat press at 375-400F and allow to come to set point | |
| (b) | Set press for medium pressure | |
| (c) | Pre-heat garment for a few seconds to remove moisture or wrinkles | |
| (d) | Place transfer face down and press for 25-30 seconds | |
| (e) | Peel away paper hot or cold | |
| 3. | Home Iron Application: | |
| (a) | It is best to iron on a smooth, hard, non porous surface. | |
| (b) | Preheat the iron on the highest setting (Cotton/Linen). DO NOT add water to the iron, steam will ruin the transfer. Allow to preheat for 5 minutes. | |
| (c) | Place a pillowcase on the ironing surface, Iron to remove wrinkles and moisture from the garment. | |
| (d) | Position transfer paper image side DOWN onto your garment | |
| (e) | Using firm pressure, slowly iron over the entire surface with sufficient overlapping (1) side to side (2) bottom to top and (3) along the edge, moving continuously for 1-2 minutes. | |
| (f) | Peel away paper hot or cold | |
| 4. | Washing and Drying: | |
| (a) | Wash and dry your transfer according to your fabric's normal wash instructions | |
| Always store unused paper in a cool and dry area sealed in a plastic bag so paper is not exposed to any excess moisture. | ||