| JetWear™ Cold Peel For Inkjet Transfers |
||
| These instructions are for transferring using a commercial heat press. | ||
| 1. | Printing Your Transfer | |
| (a) | Insert a single sheet of transfer paper into the printer with the printable surface loaded correctly for your printer. | |
| (b) | Print image and trim away any unprinted area around your image. | |
| 2. | Transferring the Image | |
| (a) | Place garment onto press pad | |
| (b) | Place transfer, print side down, onto the garment | |
| (c) | Press at 375 degrees Fahrenheit (190 degrees Celsius) with high pressure for 15 seconds | |
| (d) | When cold to touch, peel the transfer starting from one corner using firm steady pressure. | |
| 3. | Washing Instructions | |
| (a) | Turn the garment inside-out and wash separately (first time only). | |
| (b) | Machine wash in cold water with color-safe detergent. DO NOT use bleach. | |
| (c) | Remove promptly from washer to prevent colors running together. If the colors run together, rewash immediately | |
| (d) | Tumble dry with low heat. Add towels to facilitate drying | |
| (e) | If garment needs ironing, DO NOT iron directly on transfer | |