TransferWear C.L.P. For Color Laser Printer Transfers
These instructions are for transferring using a commercial heat press.
1.	Printing Your Transfer
	(a)	Reverse (flip or mirror) the image before printing.
	(b)	Set printer settings for heavy or card stock paper.
	(c)	Load transfer paper so blank side receives the image. TransferWear C.L.P.'s print side will be facing you when the paper notch is in the upper right hand corner.
2.	Transferring the Image
	(a)	Cut away blank, unprinted areas of the printed transfer.
	(b)	Place garment, mouse pad or fabric imprintable onto heat press.
	(c)	Place transfer (print side down) onto the imprintable.
	(d)	Press at 400 degrees Fahrenheit (205 degrees Celsius) for 15 seconds with heavy pressure.
	(e)	Peel transfer immediately from the imprintable using firm, steady pressure.
3.	Washing Instructions
	(a)	Machine wash warm or cold only.
	(b)	Turn garment inside out.
	(c)	Use a color safe detergent. DO NOT use bleach.
	(d)	Dry in dryer on low setting.
	(e)	If garment needs ironing, DO NOT iron directly on transfer.